Examination of Precast Concrete Movement Subjected to Vibration Employing Mass-Spring Model with Two Convective Masses
Read the full articleJournal profile
Shock and Vibration publishes papers on all aspects of shock and vibration, especially in relation to civil, mechanical and aerospace engineering applications, as well as transport, materials and geoscience.
Editor spotlight
Chief Editor Dr Tai Thai is based at the University of Melbourne and his current research focuses on high strength materials for sustainable construction of buildings, bridges and other infrastructure.
Special Issues
Latest Articles
More articlesAn Investigation of the Acoustic Enclosure of an Air Conditioning Compressor Using Response Surface Analysis and Topological Rigidity Optimization
A novel split-type air conditioning system is introduced to balance usability and portability. Unlike conventional split-type systems, where the compressor is typically placed outside, this system situates the compressor within the indoor unit, which may expose users to compressor noise. There are prominent peaks in the compressor noise spectrum, particularly at the compressor operating frequency and its harmonics, notably the second and third harmonics. The research presents a multilayered acoustic enclosure specifically designed for air conditioning compressors to address this issue without modifying the compressor or indoor unit casing. In order to get better sound insulation performance, a response surface methodology (RSM) is applied to optimize the thickness ratio, open area ratio, and open area height of the acoustic enclosure with predefined thickness. In addition, topological optimization is employed to strengthen weak areas of the acoustic enclosure. Then, experimental trials using the proposed acoustic enclosure are conducted in a semianechoic chamber. Results demonstrate significant reductions in noise levels, including 7.99 dB(A), 5.69 dB(A), and 5.19 dB(A) reductions in the fundamental frequency, second harmonic, and third harmonic noise of the compressor’s operating frequency, respectively.
Nonlinear Displacement of the Electrothermal V-Shaped Actuator
This article proposes a formula for calculating the nonlinear displacement of the electrothermal V-shaped actuator aims to determine more accurately its displacement. The nonlinear displacement model is established based on the axial deformation of V-beams with two fixed ends. Hence, the theoretical displacements of a particular V-shaped actuator (i.e. dimension as beam length of 750 μm; beam width of 6 μm; beam thickness of 30 μm; inclined angle of 2°) are compared with the simulation and experimental results. The evaluation shows that our calculation error compared with the simulation and experiment is less than 5% and 12.4%, respectively. This confirmed the advantages of the proposed formula according to the nonlinear displacement model. This work provides a theoretical model for predicting more precisely the displacement of a V-shaped actuator. The advantage of this model is that it will significantly reduce the time in the design and trial manufacturing process.
Researching the Influence of Preload on Vibration Characteristics in the Ballistic Recorder Vibration Damping System
In this study, the vibration characteristics of a bullet-loaded recorder’s vibration damping system under various preload conditions are investigated through theoretical analysis, numerical simulations, and experimental verification. The findings indicate that the inclusion of a polyurethane elastomer vibration damping buffer layer between the cartridge and the recorder, along with the application of a specific preload, significantly reduces the amplitude of vibration acceleration transmitted to the recorder’s interior. This, in turn, enhances the overload resistance of the cartridge’s internal circuit. Numerical simulation results and theoretical analysis suggest that increasing the preload on the buffer material between the elastomer and the recorder reduces both the frequency ratio and damping ratio of the damping system. This reduction further decreases the amplitude of vibration transmitted to the recorder. However, excessively high preload generates substantial compressive stress within the recorder under static conditions, intensifying during the projectile’s accelerated movement. As a consequence, deformation and damage occur to the internal circuitry. Therefore, ensuring that the recorder possesses the structural strength necessary to withstand increased preload is crucial. This balancing act improves the recorder’s resistance to shock, vibration, and overload, while also preventing excessive stress-induced damage.
Deep Multiscale Soft-Threshold Support Vector Data Description for Enhanced Heavy-Duty Gas Turbine Generator Sets’ Anomaly Detection
This paper introduces an innovative approach, Deep Multiscale Soft-Threshold Support Vector Data Description (DMS-SVDD), designed for the detection of anomalies and prediction of faults in heavy-duty gas turbine generator sets (GENSETs). The model combines a support vector data description (SVDD) with a deep autoencoder backbone network framework, integrating a multiscale convolutional neural network (M) and soft-threshold activation network (S) into the Deep-SVDD framework. In comparison with conventional methods, such as One-Class Support Vector Machine (OCSVM) and autoencoder (AE), DMS-SVDD demonstrates improvements in accuracy (by 22.94%), recall (by 32%), F1 score (by 12.02%), and smoothness (by 39.15%). The model excels particularly in feature extraction, denoising, and early fault detection, offering a proactive strategy for maintenance. Furthermore, the DMS-SVDD demonstrated enhanced training efficiency with a reduction in the convergence rounds by 66% and overall training times by 34.13%. The study concludes that DMS-SVDD presents a robust and efficient solution for gas turbine anomaly detection, with practical advantages for decision support in turbine maintenance. Future research could explore additional refinements and applications of the DMS-SVDD model across diverse industrial contexts.
Calculation of Temperature Action of Flat Steel Box Girder of Long-Span Bridges Using a Joint Model of ARMA Mean and GARCH Variance
Using the monitoring temperature field data from the flat steel box girder, the time histories of temperature data and temperature difference data are investigated using the extreme value analysis method. Because the calculation of standard values of temperature action needs massive temperature field data, the simulation of daily extreme values of temperature data and temperature difference data is carried out by virtual of Probability Statistical Method. The seasonal and nonstationary trend terms are described using the weighted sum of a series of basic elementary functions. The random fluctuation term is represented by a joint model of ARMA mean and GARCH variance. Moreover, the yearly extreme values of temperature data and temperature difference data are considered as statistical variables, and their standard values of temperature action with 50-year return period are calculated by means of the general extreme value (GEV) distributive function. The research results can supply references for temperature action of flat steel box girder.
Vibration Properties of Submerged Sandwich Cylindrical Shell Based on Wave Propagation Approach: Analytical and Experimental Investigation
The vibration properties of the submerged sandwich cylindrical shell with a viscoelastic core are investigated in this paper. Considering the acoustic-structure coupling, the analytical model of the submerged sandwich cylindrical shell that can handle three medium conditions including fluid-filled, fluid-loaded, and fluid-filled and -loaded is derived based on the wave propagation approach and the Flügge thin-shell theory. The vibration properties of the sandwich cylindrical shell under different medium and boundary conditions are analyzed, followed by a comparison of the damping effect of the constrained damping layer. Finally, an analysis is conducted on the influence of thicknesses of viscoelastic and constrained layers on vibration spectrum and natural frequency under fluid-filled and -loaded conditions. An experimental platform was established to conduct relevant experiments. Several important conclusions can be drawn.